Installing VertoOS NGX
Requirements
- Server or virtual machine: 2 vCPU, 4 GB RAM, 32 GB disk or more.
- Network ports: at least two — to the ISP (WAN) and to the local network (LAN); one more for a second ISP.
- OS: Ubuntu Server 26.04 (recommended), 24.04 or Debian 13.
- Virtualisation: VMware ESXi (VMXNET3 adapters), Proxmox VE (VirtIO), Hyper-V — guest tools are installed automatically.
Option 1. ISO image (recommended)
- Download the image for your OS on the VertoOS site and check its SHA-256.
- Write it to a USB stick (Rufus, balenaEtcher) or attach it to the VM. BIOS and UEFI are supported.
- In the VertoOS NGX menu choose "Install". The installer only asks for the disk and an OS account — everything else is installed from the image automatically, no Internet needed.
- After the reboot the setup wizard starts on the console.
Option 2. One command on an existing server
curl -fsSL https://sthost.com.ua/verto/install | sudo bash
sudo verto-setup
The first command installs the gateway (it checks the package's digital signature), the second runs the network setup wizard. Run the wizard from the server console: it reassigns the network ports and an SSH session may drop.
Option 3. Offline archive
For networks without Internet: download verto-ngx-<version>-amd64.tar.gz, unpack it on the server and run sudo ./install.sh.
Setup wizard
The wizard asks for the language, the ISP port (and a backup ISP), the LAN port, the gateway's LAN address, whether to enable the DHCP server, and the panel port (8443 by default). At the end it shows the panel address and the first sign-in password.
> If the network already has another DHCP server (a router or an old gateway), answer "No" to the DHCP question — two DHCP servers on one network hand out conflicting addresses.